描述
OP-200W · Pulsed · 200W
Control cleaning on smaller metal surfaces
The Oceanplayer Laser OP-200W is an air-cooled pulsed laser cleaning system for localized rust, oxide and coating-removal trials. Its 200W output is a starting point for selection; the actual surface condition and removal target determine a workable cleaning process.
Work around the surface you need to retain
Set a clear endpoint for the trial: residue removal, appearance and any dimensional or finish requirement. Inspect the cleaned area before deciding how to scale the process.
Discuss these requirements
- Metal grade and surface finish
- Deposit type and thickness
- Area per part and acceptable cycle time
Configuration for your application
Use these details to define the equipment enquiry. Request the final model-specific datasheet, scope of supply and acceptance sample before placing an order.
For localized surface cleaning, start with metal grade and surface finish. Confirm deposit type and thickness and area per part and acceptable cycle time as part of the selection.
| Model | OP-200W |
|---|---|
| Nominal laser output | 200W |
| Laser type | Pulsed fiber laser |
| Cooling | Air cooling |
| Process evaluation | Rust, oxides and selected coatings on suitable metal substrates |
See the surface change
General metal-cleaning examples from the existing gallery. These images illustrate surface appearance; they are not a model-specific speed test or proof of suitability for every application.
See the process in motion
Watch the working distance, scanning and repositioning. The demonstration shows a general cleaning process; model configuration and your material require separate confirmation.
Evaluate the surface and the complete work cycle
Define the removal target
Send material grade, deposit information, photographs and part dimensions. State what must remain and the next manufacturing operation.
Assess a representative sample
Agree the cleaning endpoint and inspect the surface after treatment. Include edges, recesses and the most difficult contamination in the test.
Select the production package
Confirm output, cooling, scan head, extraction and site requirements. Include handling, repeat passes and inspection in your cycle-time estimate.
Confirm the scope before you order
Equipment and accessories
Request the final source, head, cooling and accessory list. Confirm what is included and what your site needs to provide.
Installation and training
Agree installation requirements, operator training and maintenance instructions for the supplied configuration.
Delivery and support
Confirm lead time, packing, warranty terms, spare parts and the model-specific documentation needed at your destination.
Questions before choosing
Practical points for localized surface cleaning.
Is 200W enough for my rust-removal job?
It depends on rust condition, cleaning area and the finish required. A sample trial can show how many passes are needed and the achievable handling time.
What determines the cleaning rate?
Material, deposit type and thickness, laser configuration, scan settings, access and the required finish all affect output. Measure the complete cycle at an agreed cleaning endpoint.
Does laser cleaning create no waste?
Removed material still needs to be managed. Assess fumes, dust and coating residues, and provide suitable extraction and collection for the task. The process does not eliminate residue-handling responsibilities.
Discuss your application with Oceanplayer Laser
Send metal grade and surface finish, deposit type and thickness and area per part and acceptable cycle time. Request a model recommendation, sample evaluation and quotation for your project.
