描述
OP-50W · 50W · 1064nm
Define the engraving result before choosing the settings
The Oceanplayer Laser OP-50W is a 50W fiber laser marking system for buyers evaluating identification marks and engraving on suitable materials. Define the desired depth, contrast and cycle time, then qualify the complete process on representative parts.
Separate engraving depth from visual contrast
A dark surface mark and a recessed engraving are different outcomes. Agree how the mark will be measured before comparing sample results.
Discuss these requirements
- Required depth and surface finish
- Mark dimensions and artwork
- Cycle time including handling
Configuration for your application
Use these details to define the equipment enquiry. Request the final model-specific datasheet, scope of supply and acceptance sample before placing an order.
For marking and engraving, start with required depth and surface finish. Confirm mark dimensions and artwork and cycle time including handling as part of the selection.
| Model | OP-50W |
|---|---|
| Nominal laser output | 50W |
| Laser wavelength | 1064nm |
| Standard field listed | 110 × 110mm; other fields depend on lens selection |
| Cooling | Air cooling |
Process and equipment gallery
Marking and equipment-use examples from the existing product gallery. The images do not establish a particular engraving depth, code grade or cycle time.
See the process in motion
Review how the head is positioned and how the part is handled. Confirm the exact marking job and model configuration with a sample test.
Approve the mark before planning production
Define the marking job
Send the exact material, surface finish, artwork, code data and mark dimensions. State any depth or readability requirement.
Evaluate the finished mark
Review contrast, legibility and depth where required. Test the mark after the relevant cleaning, finishing or handling operations.
Confirm positioning and workflow
Agree lens and field size, fixture or hand-positioning method, software workflow and the complete part cycle before ordering.
Confirm the scope before you order
Equipment and accessories
Request the final source, head, cooling and accessory list. Confirm what is included and what your site needs to provide.
Installation and training
Agree installation requirements, operator training and maintenance instructions for the supplied configuration.
Delivery and support
Confirm lead time, packing, warranty terms, spare parts and the model-specific documentation needed at your destination.
Questions before choosing
Practical points for marking and engraving.
Can a 50W marker replace a cutting machine?
Do not select it as a general sheet-metal cutter. Cutting capability depends on the material, thickness and configuration; request a dedicated evaluation if cutting is part of your requirement.
Is maximum scanner speed the production marking rate?
No. Artwork, hatch spacing, passes, material response and part handling all affect actual output. Time the complete accepted marking job.
Does a larger marking field keep the same result?
Lens and field selection influence the process. Confirm the selected optics and test the actual mark size and required resolution before choosing a field.
Discuss your application with Oceanplayer Laser
Send required depth and surface finish, mark dimensions and artwork and cycle time including handling. Request a model recommendation, sample evaluation and quotation for your project.
