描述
OP-20W · 20W · 1064nm
Put readable identification on the part
The Oceanplayer Laser OP-20W is a 20W fiber laser marking option for part numbers, logos and identification marks. Start with the actual material and mark artwork, then verify contrast, size and readability on a sample.
Choose a mark that survives the next operation
Check readability after the handling, cleaning or finishing steps that matter to your product. A visually dark sample alone does not establish long-term legibility.
Discuss these requirements
- Material and surface coating
- Text size, logo or code data
- Contrast and reading method
Configuration for your application
Use these details to define the equipment enquiry. Request the final model-specific datasheet, scope of supply and acceptance sample before placing an order.
For part identification, start with material and surface coating. Confirm text size, logo or code data and contrast and reading method as part of the selection.
| Model | OP-20W |
|---|---|
| Nominal laser output | 20W |
| Laser wavelength | 1064nm |
| Standard field listed | 110 × 110mm; lens options must be confirmed |
| Cooling | Air cooling |
Process and equipment gallery
Marking and equipment-use examples from the existing product gallery. The images do not establish a particular engraving depth, code grade or cycle time.
See the process in motion
Review how the head is positioned and how the part is handled. Confirm the exact marking job and model configuration with a sample test.
Approve the mark before planning production
Define the marking job
Send the exact material, surface finish, artwork, code data and mark dimensions. State any depth or readability requirement.
Evaluate the finished mark
Review contrast, legibility and depth where required. Test the mark after the relevant cleaning, finishing or handling operations.
Confirm positioning and workflow
Agree lens and field size, fixture or hand-positioning method, software workflow and the complete part cycle before ordering.
Confirm the scope before you order
Equipment and accessories
Request the final source, head, cooling and accessory list. Confirm what is included and what your site needs to provide.
Installation and training
Agree installation requirements, operator training and maintenance instructions for the supplied configuration.
Delivery and support
Confirm lead time, packing, warranty terms, spare parts and the model-specific documentation needed at your destination.
Questions before choosing
Practical points for part identification.
Can it mark every plastic?
No. Plastic composition and additives affect the response to a 1064nm fiber laser. Submit the exact resin or finished part for a marking test.
Is maximum scanner speed the production marking rate?
No. Artwork, hatch spacing, passes, material response and part handling all affect actual output. Time the complete accepted marking job.
Does a larger marking field keep the same result?
Lens and field selection influence the process. Confirm the selected optics and test the actual mark size and required resolution before choosing a field.
Discuss your application with Oceanplayer Laser
Send material and surface coating, text size, logo or code data and contrast and reading method. Request a model recommendation, sample evaluation and quotation for your project.
