描述
OP-30W · 30W · 1064nm
Match the mark to your production cycle
The Oceanplayer Laser OP-30W offers 30W fiber laser output for identification and engraving evaluations. Compare the complete marking cycle on your artwork, including positioning and inspection, instead of relying on scanner speed as a parts-per-hour figure.
Measure time with the real artwork
Small serial text, a filled logo and a dense data code impose different workloads. Test the full marking job at the required size and contrast.
Discuss these requirements
- Artwork size and filled area
- Part loading and positioning
- Required code readability
Configuration for your application
Use these details to define the equipment enquiry. Request the final model-specific datasheet, scope of supply and acceptance sample before placing an order.
For repeatable production marking, start with artwork size and filled area. Confirm part loading and positioning and required code readability as part of the selection.
| Model | OP-30W |
|---|---|
| Nominal laser output | 30W |
| Laser wavelength | 1064nm |
| Standard field listed | 110 × 110mm; confirm the selected lens |
| Cooling | Air cooling |
Process and equipment gallery
Marking and equipment-use examples from the existing product gallery. The images do not establish a particular engraving depth, code grade or cycle time.
See the process in motion
Review how the head is positioned and how the part is handled. Confirm the exact marking job and model configuration with a sample test.
Approve the mark before planning production
Define the marking job
Send the exact material, surface finish, artwork, code data and mark dimensions. State any depth or readability requirement.
Evaluate the finished mark
Review contrast, legibility and depth where required. Test the mark after the relevant cleaning, finishing or handling operations.
Confirm positioning and workflow
Agree lens and field size, fixture or hand-positioning method, software workflow and the complete part cycle before ordering.
Confirm the scope before you order
Equipment and accessories
Request the final source, head, cooling and accessory list. Confirm what is included and what your site needs to provide.
Installation and training
Agree installation requirements, operator training and maintenance instructions for the supplied configuration.
Delivery and support
Confirm lead time, packing, warranty terms, spare parts and the model-specific documentation needed at your destination.
Questions before choosing
Practical points for repeatable production marking.
Will 30W always mark faster than 20W?
Not for every mark. Material, mark depth, artwork, lens and the required contrast influence the cycle. Compare accepted samples using the same design.
Is maximum scanner speed the production marking rate?
No. Artwork, hatch spacing, passes, material response and part handling all affect actual output. Time the complete accepted marking job.
Does a larger marking field keep the same result?
Lens and field selection influence the process. Confirm the selected optics and test the actual mark size and required resolution before choosing a field.
Discuss your application with Oceanplayer Laser
Send artwork size and filled area, part loading and positioning and required code readability. Request a model recommendation, sample evaluation and quotation for your project.
