描述
CW cleaning · 2000W · Water cooled
Evaluate 2kW cleaning against the full preparation workload
The Oceanplayer Laser 2kW CW cleaner combines 2000W continuous-wave output with a water-cooled configuration. Assess it on robust metal surfaces where deposit removal, heat management and production output can be measured together.
Measure accepted area per complete work cycle
Include setup, movement and collection alongside beam-on time. Check whether additional surface profiling is needed before coating.
Discuss these requirements
- Steel thickness and coating condition
- Area per shift and repeat passes
- Chiller, extraction and site services
Configuration for your application
Use these details to define the equipment enquiry. Request the final model-specific datasheet, scope of supply and acceptance sample before placing an order.
For large-area industrial cleaning, start with steel thickness and coating condition. Confirm area per shift and repeat passes and chiller, extraction and site services as part of the selection.
| Nominal laser output | 2000W / 2kW |
|---|---|
| Laser type | Continuous-wave fiber laser |
| Cooling | Integrated dual-temperature water chiller |
| Candidate tasks | Rust, coating and oxide removal on suitable metal parts |
| Validation | Removal endpoint, heat effects and full cycle time |
See the surface change
General metal-cleaning examples from the existing gallery. They show surface appearance and should not be interpreted as measured performance of this specific CW model.
See the process in motion
Observe the cleaning sequence and workpiece handling. Confirm the source type shown and the selected model separately; a general demonstration is not a throughput guarantee.
Qualify removal rate and thermal effects together
Define the metal-cleaning task
Provide substrate thickness, deposit or coating information and the required finish. Identify edges and thin sections that may respond differently.
Run a representative cleaning trial
Inspect removal quality, workpiece condition and any thermal effects. Measure repeated passes and handling at the same acceptance standard.
Prepare the complete installation
Confirm electrical supply, chiller requirements, ambient conditions, extraction and laser controls for the selected equipment package.
Confirm the scope before you order
Equipment and accessories
Request the final source, head, cooling and accessory list. Confirm what is included and what your site needs to provide.
Installation and training
Agree installation requirements, operator training and maintenance instructions for the supplied configuration.
Delivery and support
Confirm lead time, packing, warranty terms, spare parts and the model-specific documentation needed at your destination.
Questions before choosing
Practical points for large-area industrial cleaning.
Is 2kW suitable for thin automotive panels?
Do not choose it solely for speed. Thin panels need a specific heat and distortion assessment; a pulsed alternative may need to be compared in trials.
Can CW replace pulsed cleaning in every application?
No. The energy delivery and process response differ. Choose the system using the required surface condition and a representative application trial.
What costs should I include besides the machine?
Consider power, cooling, extraction, protective optics, maintenance, operator time, residue handling and any additional finishing process needed for the job.
Discuss your application with Oceanplayer Laser
Send steel thickness and coating condition, area per shift and repeat passes and chiller, extraction and site services. Request a model recommendation, sample evaluation and quotation for your project.
