描述
CW cleaning · 3000W · Water cooled
Plan high-output cleaning as a complete work station
The Oceanplayer Laser 3kW CW cleaner is a 3000W water-cooled configuration for evaluating demanding metal-cleaning workloads. Select the system with the workpiece, site services and finishing requirements in view.
Qualify the difficult areas as well as the broad surfaces
Include edges, welds and changes in material thickness. Establish repeatable settings and the required inspections before extending the process across a large job.
Discuss these requirements
- Coating layers and corrosion condition
- Workpiece heat tolerance
- Power, cooling and extraction capacity
Configuration for your application
Use these details to define the equipment enquiry. Request the final model-specific datasheet, scope of supply and acceptance sample before placing an order.
For high-output cleaning projects, start with coating layers and corrosion condition. Confirm workpiece heat tolerance and power, cooling and extraction capacity as part of the selection.
| Nominal laser output | 3000W / 3kW |
|---|---|
| Laser type | Continuous-wave fiber laser |
| Cooling | Integrated dual-temperature water chiller |
| Application review | Rust, coatings and scale on suitable robust metal parts |
| Installation review | Electrical supply, cooling environment and extraction |
See the surface change
General metal-cleaning examples from the existing gallery. They show surface appearance and should not be interpreted as measured performance of this specific CW model.
See the process in motion
Observe the cleaning sequence and workpiece handling. Confirm the source type shown and the selected model separately; a general demonstration is not a throughput guarantee.
Qualify removal rate and thermal effects together
Define the metal-cleaning task
Provide substrate thickness, deposit or coating information and the required finish. Identify edges and thin sections that may respond differently.
Run a representative cleaning trial
Inspect removal quality, workpiece condition and any thermal effects. Measure repeated passes and handling at the same acceptance standard.
Prepare the complete installation
Confirm electrical supply, chiller requirements, ambient conditions, extraction and laser controls for the selected equipment package.
Confirm the scope before you order
Equipment and accessories
Request the final source, head, cooling and accessory list. Confirm what is included and what your site needs to provide.
Installation and training
Agree installation requirements, operator training and maintenance instructions for the supplied configuration.
Delivery and support
Confirm lead time, packing, warranty terms, spare parts and the model-specific documentation needed at your destination.
Questions before choosing
Practical points for high-output cleaning projects.
Will 3kW always finish a job faster than 2kW?
Not necessarily. Handling, scan settings, deposit behavior and the accepted surface condition can limit the process. Compare completed work at the same quality level.
Can CW replace pulsed cleaning in every application?
No. The energy delivery and process response differ. Choose the system using the required surface condition and a representative application trial.
What costs should I include besides the machine?
Consider power, cooling, extraction, protective optics, maintenance, operator time, residue handling and any additional finishing process needed for the job.
Discuss your application with Oceanplayer Laser
Send coating layers and corrosion condition, workpiece heat tolerance and power, cooling and extraction capacity. Request a model recommendation, sample evaluation and quotation for your project.
