描述
CW cleaning · 1200W · Water cooled
Compare a water-cooled system on recurring cleaning jobs
The Oceanplayer Laser 1200W CW cleaner is a continuous-wave, water-cooled option for industrial metal-cleaning trials. Assess removal quality, thermal effects and handling time on a typical part before selecting it for recurring maintenance.
Build the trial around the normal work cycle
Evaluate repeated parts rather than a single clean patch. Include cooling needs, repositioning and residue collection in the production assessment.
Discuss these requirements
- Typical contamination and metal thickness
- Cleaning time per part
- Cooling and operating environment
Configuration for your application
Use these details to define the equipment enquiry. Request the final model-specific datasheet, scope of supply and acceptance sample before placing an order.
For recurring industrial cleaning, start with typical contamination and metal thickness. Confirm cleaning time per part and cooling and operating environment as part of the selection.
| Nominal laser output | 1200W |
|---|---|
| Laser type | Continuous-wave fiber laser |
| Cooling | Integrated dual-temperature water chiller |
| Selection basis | Material tolerance, deposit and workload |
| Process acceptance | Cleaning quality and workpiece condition after treatment |
See the surface change
General metal-cleaning examples from the existing gallery. They show surface appearance and should not be interpreted as measured performance of this specific CW model.
See the process in motion
Observe the cleaning sequence and workpiece handling. Confirm the source type shown and the selected model separately; a general demonstration is not a throughput guarantee.
Qualify removal rate and thermal effects together
Define the metal-cleaning task
Provide substrate thickness, deposit or coating information and the required finish. Identify edges and thin sections that may respond differently.
Run a representative cleaning trial
Inspect removal quality, workpiece condition and any thermal effects. Measure repeated passes and handling at the same acceptance standard.
Prepare the complete installation
Confirm electrical supply, chiller requirements, ambient conditions, extraction and laser controls for the selected equipment package.
Confirm the scope before you order
Equipment and accessories
Request the final source, head, cooling and accessory list. Confirm what is included and what your site needs to provide.
Installation and training
Agree installation requirements, operator training and maintenance instructions for the supplied configuration.
Delivery and support
Confirm lead time, packing, warranty terms, spare parts and the model-specific documentation needed at your destination.
Questions before choosing
Practical points for recurring industrial cleaning.
Is 1200W a pulsed laser configuration?
This page describes continuous-wave output. If a pulsed process is required, request a separate model recommendation and compare results on your sample.
Can CW replace pulsed cleaning in every application?
No. The energy delivery and process response differ. Choose the system using the required surface condition and a representative application trial.
What costs should I include besides the machine?
Consider power, cooling, extraction, protective optics, maintenance, operator time, residue handling and any additional finishing process needed for the job.
Discuss your application with Oceanplayer Laser
Send typical contamination and metal thickness, cleaning time per part and cooling and operating environment. Request a model recommendation, sample evaluation and quotation for your project.
