描述
CW fiber laser welding
Develop a stable process for production seams
Oceanplayer Laser continuous-wave welding systems deliver sustained laser output for metal joining. Match power, travel speed, joint preparation and cooling to the part, then verify seam consistency over the intended production cycle.
Check the complete seam, not only its center
Evaluate starts, stops, corners and changes in joint gap. Repeat the trial over representative parts to understand the process window.
Discuss these requirements
- Seam length and travel sequence
- Joint preparation and fit-up
- Cooling and production duty
Configuration for your application
Use these details to define the equipment enquiry. Request the final model-specific datasheet, scope of supply and acceptance sample before placing an order.
For continuous-wave joining, start with seam length and travel sequence. Confirm joint preparation and fit-up and cooling and production duty as part of the selection.
| Laser type | Continuous-wave fiber laser |
|---|---|
| Listed power options | 1500W / 2000W / 3000W |
| Cooling | Industrial water-chiller configuration listed |
| Application | Metal joining with qualified process settings |
| Selection basis | Material, joint design and production duty |
Process and equipment gallery
Welding examples from the existing product gallery. Joint appearance does not establish penetration, strength or qualification for your application.
See the process in motion
Review torch access, part positioning and seam handling. The video illustrates the process; it does not establish capacity for every model or material.
Build a welding procedure around the part
Define the joint
Send the material grade, thickness, joint drawing and required weld acceptance. Include the real fit-up and fixture conditions.
Review the sample weld
Evaluate penetration, seam appearance and the inspection results required by your application. Include any finishing work in the comparison.
Confirm the equipment package
Agree the laser source, head, cooling, shielding, wire feed if required, and installation needs before ordering.
Confirm the scope before you order
Equipment and accessories
Request the final source, head, cooling and accessory list. Confirm what is included and what your site needs to provide.
Installation and training
Agree installation requirements, operator training and maintenance instructions for the supplied configuration.
Delivery and support
Confirm lead time, packing, warranty terms, spare parts and the model-specific documentation needed at your destination.
Questions before choosing
Practical points for continuous-wave joining.
Does continuous-wave mean the machine can run indefinitely?
No. Production duty depends on the complete system, cooling conditions and maintenance requirements. Confirm the approved duty and environment for the supplied configuration.
How do I compare production speed?
Measure an accepted part from positioning through welding and finishing. Travel speed on a straight test seam is not the same as the output of a complete assembly.
What is needed to set up the work area?
Plan trained operation, suitable laser controls and protection, fume extraction, electrical supply and shielding-gas arrangements for the selected system. Follow the equipment instructions and your workplace assessment.
Discuss your application with Oceanplayer Laser
Send seam length and travel sequence, joint preparation and fit-up and cooling and production duty. Request a model recommendation, sample evaluation and quotation for your project.
