描述
Fiber laser welding · Configuration guide
Choose the complete system for your welding process
Oceanplayer Laser fiber laser welding systems combine a laser source, delivery head and process controls for metal joining. This range page helps define a suitable configuration using your joint design, material and production requirements.
Specify the system as a complete package
Confirm the source, welding head, control functions and cooling arrangement together. Equipment selection should end with a defined configuration and an accepted sample.
Discuss these requirements
- Laser source and operating mode
- Cooling and electrical services
- Joint quality and production duty
Configuration for your application
Use these details to define the equipment enquiry. Request the final model-specific datasheet, scope of supply and acceptance sample before placing an order.
For system configuration, start with laser source and operating mode. Confirm cooling and electrical services and joint quality and production duty as part of the selection.
| Equipment | Fiber laser welding system |
|---|---|
| Listed power options | 1200W / 1500W / 2000W / 3000W |
| Source configuration | Confirm laser source and output mode in the quotation |
| Operation | Select head, cooling and process accessories for the joint |
| Capacity | Verified against material, joint and inspection requirements |
Process and equipment gallery
Welding examples from the existing product gallery. Joint appearance does not establish penetration, strength or qualification for your application.
See the process in motion
Review torch access, part positioning and seam handling. The video illustrates the process; it does not establish capacity for every model or material.
Build a welding procedure around the part
Define the joint
Send the material grade, thickness, joint drawing and required weld acceptance. Include the real fit-up and fixture conditions.
Review the sample weld
Evaluate penetration, seam appearance and the inspection results required by your application. Include any finishing work in the comparison.
Confirm the equipment package
Agree the laser source, head, cooling, shielding, wire feed if required, and installation needs before ordering.
Confirm the scope before you order
Equipment and accessories
Request the final source, head, cooling and accessory list. Confirm what is included and what your site needs to provide.
Installation and training
Agree installation requirements, operator training and maintenance instructions for the supplied configuration.
Delivery and support
Confirm lead time, packing, warranty terms, spare parts and the model-specific documentation needed at your destination.
Questions before choosing
Practical points for system configuration.
Is every fiber laser welder a pulsed laser?
No. Fiber describes the laser technology, while continuous or pulsed describes the output mode. Ask for the exact source and operating mode in the quotation.
How do I compare production speed?
Measure an accepted part from positioning through welding and finishing. Travel speed on a straight test seam is not the same as the output of a complete assembly.
What is needed to set up the work area?
Plan trained operation, suitable laser controls and protection, fume extraction, electrical supply and shielding-gas arrangements for the selected system. Follow the equipment instructions and your workplace assessment.
Discuss your application with Oceanplayer Laser
Send laser source and operating mode, cooling and electrical services and joint quality and production duty. Request a model recommendation, sample evaluation and quotation for your project.
