描述
OP-2000W · 2000W
Plan the whole welding station around the job
The Oceanplayer Laser OP-2000W pairs 2000W continuous-wave laser output with a water-cooled system. It is a configuration to evaluate for fabrication jobs needing a larger process window, with cooling capacity, joint preparation and inspection planned together.


Include cooling in the production plan
Confirm chiller requirements, available space and maintenance access. Validate the proposed duty cycle using the intended part and production sequence.
Discuss these requirements
- Required penetration and joint design
- Production duty and ambient conditions
- Electrical supply and chiller maintenance
Configuration for your application
Use these details to define the equipment enquiry. Request the final model-specific datasheet, scope of supply and acceptance sample before placing an order.
For water-cooled fabrication, start with required penetration and joint design. Confirm production duty and ambient conditions and electrical supply and chiller maintenance as part of the selection.
| Model | OP-2000W |
|---|---|
| Nominal laser output | 2000W / 2kW |
| Laser type | Continuous-wave fiber laser |
| Cooling | Integrated industrial water chiller |
| Capacity verification | Sample weld against the required penetration and quality criteria |
Process and equipment gallery
Welding examples from the existing product gallery. Joint appearance does not establish penetration, strength or qualification for your application.




See the process in motion
Review torch access, part positioning and seam handling. The video illustrates the process; it does not establish capacity for every model or material.
Build a welding procedure around the part
Define the joint
Send the material grade, thickness, joint drawing and required weld acceptance. Include the real fit-up and fixture conditions.
Review the sample weld
Evaluate penetration, seam appearance and the inspection results required by your application. Include any finishing work in the comparison.
Confirm the equipment package
Agree the laser source, head, cooling, shielding, wire feed if required, and installation needs before ordering.
Confirm the scope before you order
Equipment and accessories
Request the final source, head, cooling and accessory list. Confirm what is included and what your site needs to provide.
Installation and training
Agree installation requirements, operator training and maintenance instructions for the supplied configuration.
Delivery and support
Confirm lead time, packing, warranty terms, spare parts and the model-specific documentation needed at your destination.
Questions before choosing
Practical points for water-cooled fabrication.
Does 2000W guarantee a full-penetration weld?
No. Full penetration depends on material, thickness, joint design and process settings. Establish the weld result with a representative sample and suitable inspection.
How do I compare production speed?
Measure an accepted part from positioning through welding and finishing. Travel speed on a straight test seam is not the same as the output of a complete assembly.
What is needed to set up the work area?
Plan trained operation, suitable laser controls and protection, fume extraction, electrical supply and shielding-gas arrangements for the selected system. Follow the equipment instructions and your workplace assessment.
Discuss your application with Oceanplayer Laser
Send required penetration and joint design, production duty and ambient conditions and electrical supply and chiller maintenance. Request a model recommendation, sample evaluation and quotation for your project.




