描述
OP-1500W · 1500W
Match the welder to everyday fabrication
The Oceanplayer Laser OP-1500W is a 1500W handheld welding option for workshops assessing stainless steel, carbon steel and aluminum assemblies. Define the joint range and daily workload first, then confirm cooling, torch and process settings for the selected package.


Choose around your production mix
Use several representative parts in the trial, including the most difficult joint. A successful straight seam on one coupon does not establish the working range for every assembly.
Discuss these requirements
- Range of alloys and thicknesses
- Butt, lap or fillet joints
- Daily workload and cooling conditions
Configuration for your application
Use these details to define the equipment enquiry. Request the final model-specific datasheet, scope of supply and acceptance sample before placing an order.
For mixed fabrication work, start with range of alloys and thicknesses. Confirm butt, lap or fillet joints and daily workload and cooling conditions as part of the selection.
| Model | OP-1500W |
|---|---|
| Nominal laser output | 1500W / 1.5kW |
| Cooling | Air-cooled configuration listed; confirm the supplied package |
| Process | Handheld fiber laser welding |
| Application selection | Alloy, joint geometry and production workload |
Process and equipment gallery
Welding examples from the existing product gallery. Joint appearance does not establish penetration, strength or qualification for your application.




See the process in motion
Review torch access, part positioning and seam handling. The video illustrates the process; it does not establish capacity for every model or material.
Build a welding procedure around the part
Define the joint
Send the material grade, thickness, joint drawing and required weld acceptance. Include the real fit-up and fixture conditions.
Review the sample weld
Evaluate penetration, seam appearance and the inspection results required by your application. Include any finishing work in the comparison.
Confirm the equipment package
Agree the laser source, head, cooling, shielding, wire feed if required, and installation needs before ordering.
Confirm the scope before you order
Equipment and accessories
Request the final source, head, cooling and accessory list. Confirm what is included and what your site needs to provide.
Installation and training
Agree installation requirements, operator training and maintenance instructions for the supplied configuration.
Delivery and support
Confirm lead time, packing, warranty terms, spare parts and the model-specific documentation needed at your destination.
Questions before choosing
Practical points for mixed fabrication work.
What thickness can the 1500W model weld?
There is no single thickness limit for every alloy and joint. Provide material, thickness, joint type and the penetration requirement for a sample-based recommendation.
How do I compare production speed?
Measure an accepted part from positioning through welding and finishing. Travel speed on a straight test seam is not the same as the output of a complete assembly.
What is needed to set up the work area?
Plan trained operation, suitable laser controls and protection, fume extraction, electrical supply and shielding-gas arrangements for the selected system. Follow the equipment instructions and your workplace assessment.
Discuss your application with Oceanplayer Laser
Send range of alloys and thicknesses, butt, lap or fillet joints and daily workload and cooling conditions. Request a model recommendation, sample evaluation and quotation for your project.





