描述
OP-1000W · 1000W
Make the seam part of your finished product
For sheet-metal products where the weld remains visible, the Oceanplayer Laser OP-1000W supports a practical evaluation of seam appearance, fit-up and finishing work. Compare a complete welded assembly, rather than laser output alone.


Assess the finished assembly
Test straight runs, corners and joints near formed edges. Include the time spent positioning, welding and finishing when comparing the process with your current method.
Discuss these requirements
- Material grade and surface finish
- Seam length and access
- Finishing and inspection requirements
Configuration for your application
Use these details to define the equipment enquiry. Request the final model-specific datasheet, scope of supply and acceptance sample before placing an order.
For visible sheet-metal seams, start with material grade and surface finish. Confirm seam length and access and finishing and inspection requirements as part of the selection.
| Model | OP-1000W |
|---|---|
| Nominal laser output | 1000W |
| Laser operation | Continuous-wave fiber laser; settings depend on configuration |
| Typical evaluation | Sheet-metal fabrication and enclosures |
| Weld acceptance | Appearance and penetration to your agreed inspection criteria |
Process and equipment gallery
Welding examples from the existing product gallery. Joint appearance does not establish penetration, strength or qualification for your application.




See the process in motion
Review torch access, part positioning and seam handling. The video illustrates the process; it does not establish capacity for every model or material.
Build a welding procedure around the part
Define the joint
Send the material grade, thickness, joint drawing and required weld acceptance. Include the real fit-up and fixture conditions.
Review the sample weld
Evaluate penetration, seam appearance and the inspection results required by your application. Include any finishing work in the comparison.
Confirm the equipment package
Agree the laser source, head, cooling, shielding, wire feed if required, and installation needs before ordering.
Confirm the scope before you order
Equipment and accessories
Request the final source, head, cooling and accessory list. Confirm what is included and what your site needs to provide.
Installation and training
Agree installation requirements, operator training and maintenance instructions for the supplied configuration.
Delivery and support
Confirm lead time, packing, warranty terms, spare parts and the model-specific documentation needed at your destination.
Questions before choosing
Practical points for visible sheet-metal seams.
Will the weld need polishing?
It may. The answer depends on the joint, settings and appearance standard. Review an agreed sample after welding and after any finishing step before planning production.
How do I compare production speed?
Measure an accepted part from positioning through welding and finishing. Travel speed on a straight test seam is not the same as the output of a complete assembly.
What is needed to set up the work area?
Plan trained operation, suitable laser controls and protection, fume extraction, electrical supply and shielding-gas arrangements for the selected system. Follow the equipment instructions and your workplace assessment.
Discuss your application with Oceanplayer Laser
Send material grade and surface finish, seam length and access and finishing and inspection requirements. Request a model recommendation, sample evaluation and quotation for your project.





