描述
OP-700W · 700W
Build a controlled process for thin metal assemblies
The Oceanplayer Laser OP-700W brings handheld laser welding to small sheet-metal assemblies, cabinets and precision fabrications. Start with the joint you need to make: material grade, sheet thickness, fit-up and the finish required after welding.
Keep the welding task in focus
Evaluate the 700W configuration on the actual thin-sheet joint, including corners and starts and stops. A lower nominal power does not remove the need to check distortion or penetration.
Discuss these requirements
- Sheet thickness and joint geometry
- Edge fit-up and clamping
- Visible seam finish
Configuration for your application
Use these details to define the equipment enquiry. Request the final model-specific datasheet, scope of supply and acceptance sample before placing an order.
For thin sheet assemblies, start with sheet thickness and joint geometry. Confirm edge fit-up and clamping and visible seam finish as part of the selection.
| Model | OP-700W |
|---|---|
| Nominal laser output | 700W |
| Operation | Handheld fiber laser welding |
| Material evaluation | Stainless steel, carbon steel and aluminum; suitability depends on alloy and joint |
| Weld capacity | Confirm by sample weld and inspection |
Process and equipment gallery
Welding examples from the existing product gallery. Joint appearance does not establish penetration, strength or qualification for your application.
See the process in motion
Review torch access, part positioning and seam handling. The video illustrates the process; it does not establish capacity for every model or material.
Build a welding procedure around the part
Define the joint
Send the material grade, thickness, joint drawing and required weld acceptance. Include the real fit-up and fixture conditions.
Review the sample weld
Evaluate penetration, seam appearance and the inspection results required by your application. Include any finishing work in the comparison.
Confirm the equipment package
Agree the laser source, head, cooling, shielding, wire feed if required, and installation needs before ordering.
Confirm the scope before you order
Equipment and accessories
Request the final source, head, cooling and accessory list. Confirm what is included and what your site needs to provide.
Installation and training
Agree installation requirements, operator training and maintenance instructions for the supplied configuration.
Delivery and support
Confirm lead time, packing, warranty terms, spare parts and the model-specific documentation needed at your destination.
Questions before choosing
Practical points for thin sheet assemblies.
Is 700W suitable for every thin sheet?
No. Alloy, joint gap, weld speed, access and the required penetration all affect the result. Send a joint drawing and representative samples so the welding procedure can be assessed.
How do I compare production speed?
Measure an accepted part from positioning through welding and finishing. Travel speed on a straight test seam is not the same as the output of a complete assembly.
What is needed to set up the work area?
Plan trained operation, suitable laser controls and protection, fume extraction, electrical supply and shielding-gas arrangements for the selected system. Follow the equipment instructions and your workplace assessment.
Discuss your application with Oceanplayer Laser
Send sheet thickness and joint geometry, edge fit-up and clamping and visible seam finish. Request a model recommendation, sample evaluation and quotation for your project.
