描述
Stainless steel fabrication
Make appearance and corrosion requirements part of the trial
Oceanplayer Laser welding systems can be evaluated for stainless steel panels, cabinets and fabricated components. Define the alloy, seam appearance and service conditions so shielding, finishing and inspection are considered alongside the weld itself.
Agree on the finished surface standard
Evaluate weld appearance with the intended shielding and finishing procedure. If corrosion performance matters, include the required post-weld treatment and acceptance tests.
Discuss these requirements
- Stainless grade and thickness
- Visible finish and discoloration limit
- Service and corrosion requirements
Configuration for your application
Use these details to define the equipment enquiry. Request the final model-specific datasheet, scope of supply and acceptance sample before placing an order.
For stainless steel assemblies, start with stainless grade and thickness. Confirm visible finish and discoloration limit and service and corrosion requirements as part of the selection.
| Primary application | Stainless steel welding, including grade-specific evaluation |
|---|---|
| Listed power options | 1200W / 1500W / 2000W / 3000W |
| Laser technology | Continuous-wave fiber laser |
| Shielding | Select gas and delivery conditions for the alloy and procedure |
| Final finish | Agree appearance and any post-weld treatment requirements |
Process and equipment gallery
Welding examples from the existing product gallery. Joint appearance does not establish penetration, strength or qualification for your application.
See the process in motion
Review torch access, part positioning and seam handling. The video illustrates the process; it does not establish capacity for every model or material.
Build a welding procedure around the part
Define the joint
Send the material grade, thickness, joint drawing and required weld acceptance. Include the real fit-up and fixture conditions.
Review the sample weld
Evaluate penetration, seam appearance and the inspection results required by your application. Include any finishing work in the comparison.
Confirm the equipment package
Agree the laser source, head, cooling, shielding, wire feed if required, and installation needs before ordering.
Confirm the scope before you order
Equipment and accessories
Request the final source, head, cooling and accessory list. Confirm what is included and what your site needs to provide.
Installation and training
Agree installation requirements, operator training and maintenance instructions for the supplied configuration.
Delivery and support
Confirm lead time, packing, warranty terms, spare parts and the model-specific documentation needed at your destination.
Questions before choosing
Practical points for stainless steel assemblies.
Will a bright seam need no further treatment?
Not necessarily. Surface appearance alone does not establish corrosion performance. Follow the finishing, cleaning and passivation requirements of the intended application.
How do I compare production speed?
Measure an accepted part from positioning through welding and finishing. Travel speed on a straight test seam is not the same as the output of a complete assembly.
What is needed to set up the work area?
Plan trained operation, suitable laser controls and protection, fume extraction, electrical supply and shielding-gas arrangements for the selected system. Follow the equipment instructions and your workplace assessment.
Discuss your application with Oceanplayer Laser
Send stainless grade and thickness, visible finish and discoloration limit and service and corrosion requirements. Request a model recommendation, sample evaluation and quotation for your project.
