显示 1-16 个结果（共 43 个结果）
-
1000W Laser Cleaning Machine
Oceanplayer Laser offers 1000W cleaning configurations with different process characteristics. Confirm whether your application calls for pulsed or continuous-wave output before comparing removal rate, cooling and surface suitability.
- Pulsed or CW process choice
- Deposit thickness and material tolerance
- Cooling, workload and footprint
-
1200W Air-Cooled Handheld Laser Welder
The Oceanplayer Laser 1200W air-cooled handheld welder is a compact fabrication option to evaluate for sheet-metal joints. Confirm the electrical supply, ambient conditions and joint requirements before choosing the installation.
- Single-phase supply availability
- Alloy, joint gap and thickness
- Ventilation and operating duty
-
1200W CW Water-Cooled Laser Cleaner
The Oceanplayer Laser 1200W CW cleaner is a continuous-wave, water-cooled option for industrial metal-cleaning trials. Assess removal quality, thermal effects and handling time on a typical part before selecting it for recurring maintenance.
- Typical contamination and metal thickness
- Cleaning time per part
- Cooling and operating environment
-
200W Pulsed Laser Rust Removal Machine
This Oceanplayer Laser 200W pulsed rust-removal system is aimed at localized metal-cleaning tasks. Define the rust condition, remaining metal condition and the next operation before deciding whether the process fits the job.
- Surface rust versus deep corrosion
- Metal thickness and geometry
- Required condition before coating or assembly
-
2kW CW Water-Cooled Laser Cleaner
The Oceanplayer Laser 2kW CW cleaner combines 2000W continuous-wave output with a water-cooled configuration. Assess it on robust metal surfaces where deposit removal, heat management and production output can be measured together.
- Steel thickness and coating condition
- Area per shift and repeat passes
- Chiller, extraction and site services
-
300W Pulsed Laser Cleaning Machine
This Oceanplayer Laser 300W pulsed cleaning option is for buyers assessing localized coating, rust or residue removal. Use the product configuration as the start of a sample trial, then select cooling and optics for the required work.
- Deposit and substrate combination
- Working field and access
- Expected workload and cooling
-
3kW CW Water-Cooled Laser Cleaner
The Oceanplayer Laser 3kW CW cleaner is a 3000W water-cooled configuration for evaluating demanding metal-cleaning workloads. Select the system with the workpiece, site services and finishing requirements in view.
- Coating layers and corrosion condition
- Workpiece heat tolerance
- Power, cooling and extraction capacity
-
Air-Cooled Laser Welder
An Oceanplayer Laser air-cooled welder can suit buyers seeking a welding package without a water-chiller routine. Evaluate the proposed model against ambient temperature, duty cycle and the actual joint before choosing the system.
- Workshop temperature and ventilation
- Production duty and idle time
- Alloy, thickness and joint type
-
Aluminum Laser Welding Machine
Oceanplayer Laser aluminum welding systems are selected around the alloy, surface condition and joint geometry. Evaluate a representative assembly to confirm penetration, porosity and finish rather than choosing from nominal wattage alone.
- Alloy series and temper
- Oxide removal and fit-up
- Porosity and strength acceptance
-
Continuous-Wave Laser Welding Machine
Oceanplayer Laser continuous-wave welding systems deliver sustained laser output for metal joining. Match power, travel speed, joint preparation and cooling to the part, then verify seam consistency over the intended production cycle.
- Seam length and travel sequence
- Joint preparation and fit-up
- Cooling and production duty
-
Fiber Laser Cleaning Machine
Oceanplayer Laser fiber laser cleaning systems support application-led equipment selection. Define the deposit to remove, the material to retain and the output required, then compare a suitable laser configuration using your own samples.
- Substrate and deposit
- Precision versus area throughput
- Manual or integrated workflow
-
Fiber Laser Welding Machine
Oceanplayer Laser fiber laser welding systems combine a laser source, delivery head and process controls for metal joining. This range page helps define a suitable configuration using your joint design, material and production requirements.
- Laser source and operating mode
- Cooling and electrical services
- Joint quality and production duty
-
Handheld Fiber Laser Welding Machine
Oceanplayer Laser handheld fiber laser welding systems are offered for fabricators evaluating seams on panels, frames and shaped assemblies. Select the power and torch package around access, fit-up and the required weld result.
- Joint access and part orientation
- Operator reach and workpiece handling
- Material, thickness and required penetration
-
Handheld Pulsed Laser Cleaning Machine
Oceanplayer Laser handheld cleaning systems let buyers evaluate localized treatment on parts that are awkward to move or fixture. Match the head, cable reach and laser configuration to the work area and cleaning target.
- Workpiece size and access
- Cable routing and operator position
- Deposit and surface requirements
-
Laser Cleaning Machine Selection for Your Application
The best laser cleaning machine is the one that meets your removal, surface-quality and production requirements. Oceanplayer Laser helps turn those requirements into a defined equipment configuration and an application trial.
- Cleaning outcome and reject limits
- Throughput and operator access
- Purchase and operating requirements
-
Laser Cleaning of Weld Seams and Heat Tint
Oceanplayer Laser pulsed cleaning systems can be evaluated for oxides and heat tint around weld seams. Define the alloy, visual finish and any corrosion-performance requirement before selecting the cleaning settings.
- Alloy and weld condition
- Heat tint or oxide to remove
- Surface finish and corrosion requirements