显示 17-32 个结果（共 43 个结果）
-
Laser Descaling Machine for Metal Surfaces
Oceanplayer Laser descaling systems are evaluated for oxide and scale removal from metal surfaces. The adhesion and thickness of the scale matter as much as the metal beneath it, so use representative samples to define a suitable cleaning process.
- Scale thickness and adhesion
- Metal grade and surface profile
- Next operation and cleaning endpoint
-
Laser Rust Removal Machine for Metal
Oceanplayer Laser metal rust-removal systems are evaluated for maintenance, refurbishment and surface preparation. Match the method to the metal, corrosion condition and the next operation so the cleaning result can be assessed in context.
- Metal grade and corrosion depth
- Part geometry and access
- Coating, assembly or inspection after cleaning
-
Laser Rust Removal Machine for Steel Plates
Oceanplayer Laser steel-plate cleaning systems are selected around rust condition, coating requirements and usable production output. Test a representative plate area, including edges and scale, before estimating project throughput.
- Plate thickness and scale condition
- Area and coating system
- Required profile and cleanliness
-
OP-1000W CW Laser Cleaning Machine
The Oceanplayer Laser OP-1000W uses a 1000W continuous-wave fiber laser with water cooling. Evaluate this configuration for rust and coating removal on metal parts where cleaning output and heat management can be assessed together.
- Metal thickness and heat tolerance
- Rust or coating thickness
- Cleaning area and production cycle
-
OP-1000W Handheld Laser Welding Machine
For sheet-metal products where the weld remains visible, the Oceanplayer Laser OP-1000W supports a practical evaluation of seam appearance, fit-up and finishing work. Compare a complete welded assembly, rather than laser output alone.
- Material grade and surface finish
- Seam length and access
- Finishing and inspection requirements
-
OP-1500W Handheld Laser Welding Machine
The Oceanplayer Laser OP-1500W is a 1500W handheld welding option for workshops assessing stainless steel, carbon steel and aluminum assemblies. Define the joint range and daily workload first, then confirm cooling, torch and process settings for the selected package.
- Range of alloys and thicknesses
- Butt, lap or fillet joints
- Daily workload and cooling conditions
-
OP-2000W Water-Cooled Laser Welding Machine
The Oceanplayer Laser OP-2000W pairs 2000W continuous-wave laser output with a water-cooled system. It is a configuration to evaluate for fabrication jobs needing a larger process window, with cooling capacity, joint preparation and inspection planned together.
- Required penetration and joint design
- Production duty and ambient conditions
- Electrical supply and chiller maintenance
-
OP-200W Pulsed Laser Cleaning Machine
The Oceanplayer Laser OP-200W is an air-cooled pulsed laser cleaning system for localized rust, oxide and coating-removal trials. Its 200W output is a starting point for selection; the actual surface condition and removal target determine a workable cleaning process.
- Metal grade and surface finish
- Deposit type and thickness
- Area per part and acceptable cycle time
-
OP-20W Fiber Laser Marking Machine
The Oceanplayer Laser OP-20W is a 20W fiber laser marking option for part numbers, logos and identification marks. Start with the actual material and mark artwork, then verify contrast, size and readability on a sample.
- Material and surface coating
- Text size, logo or code data
- Contrast and reading method
-
OP-300W Pulsed Laser Cleaning Machine
The Oceanplayer Laser OP-300W is a 300W pulsed cleaning system for workshops comparing localized surface preparation with abrasive or chemical methods. Assess removal quality, operator access and time per part on the deposits you actually encounter.
- Typical and worst-case contamination
- Surface area and geometry
- Cleaning endpoint and handling time
-
OP-30W Fiber Laser Marking Machine
The Oceanplayer Laser OP-30W offers 30W fiber laser output for identification and engraving evaluations. Compare the complete marking cycle on your artwork, including positioning and inspection, instead of relying on scanner speed as a parts-per-hour figure.
- Artwork size and filled area
- Part loading and positioning
- Required code readability
-
OP-500W Pulsed Laser Cleaning Machine
The Oceanplayer Laser OP-500W provides a 500W pulsed configuration for industrial surface-cleaning trials. Choose it by the combination of removal target, surface tolerance and production workload, rather than assuming that higher power automatically produces a better finish.
- Coating or oxide to remove
- Surface tolerance after cleaning
- Batch size and required output
-
OP-50W Fiber Laser Marking Machine
The Oceanplayer Laser OP-50W is a 50W fiber laser marking system for buyers evaluating identification marks and engraving on suitable materials. Define the desired depth, contrast and cycle time, then qualify the complete process on representative parts.
- Required depth and surface finish
- Mark dimensions and artwork
- Cycle time including handling
-
OP-700W Handheld Laser Welding Machine
The Oceanplayer Laser OP-700W brings handheld laser welding to small sheet-metal assemblies, cabinets and precision fabrications. Start with the joint you need to make: material grade, sheet thickness, fit-up and the finish required after welding.
- Sheet thickness and joint geometry
- Edge fit-up and clamping
- Visible seam finish
-
Pre-Welding Laser Cleaning Machine
An Oceanplayer Laser pre-welding cleaner is selected around the joining surface and the welding procedure that follows. Evaluate removal of rust, oxides or process residue on the actual joint area, then assess the subsequent weld.
- Joint area and access
- Contaminant before welding
- Time between cleaning and welding
-
Pulsed Laser Cleaner for Automotive Restoration
Oceanplayer Laser pulsed cleaners can be evaluated for rust, paint and process-residue removal during automotive restoration. Treat thin panels, structural parts and plated trim as different jobs, with separate limits for heat, finish and remaining metal condition.
- Panel thickness and corrosion condition
- Paint, underseal or plating present
- Repair, welding or repainting after cleaning